THE SALE IS OVER - 3D Star Wars Wall Mural

3D Star Wars Wall Mural

You can now have this very popular Star Wars wall mural in your home. It is a stunning mural that all little and big fans of this unique film series will be thrilled about. 

The mural consists of 12 panels. You will need a 244 x 305 cm area for the application. It is quick and easy to apply and you don't need to have any previous experience. 3D wall murals can also be applied to already existing wallpaper. It is the ideal option for decorating a children's room or a play corner. In case your wall is bigger, the mural stands out brilliantly even in the centre of a wall.

INSTRUCTIONS FOR WALL MURAL APPLICATION - USE STANDARD WALLPAPER GLUE

- Select panel no. 1 Lay the panel on a flat surface, picture down. Apply glue to the mural, let it absorb and then hang the mural on the wall.

- Repeat the steps for panels 2 to 12. 

Before you start:

The mural consists of 12 panels. Lay out the individual panels on the floor in the correct order and check for possible defects. The placement of the first panel determines the overall look of the mural. Therefore take plenty of time and care to place it correctly.

Follow the manufacturer's instructions for the application of the individual panels. Do not wait too long between applying each panel to make sure the edges line up. The mural starts to dry after being applied to the wall. Wet mural is usually approx. 1 cm bigger than dry mural. Carefully remove any glue residue with a soft cloth. We recommend slightly overlapping the individual panel edges. This will prevent any gaps from occurring between the individual panels after drying. Too much rubbing and cleaning will remove the ink from the paper.